Instructions for use of digital glass constant temperature water bath

Instructions for use of digital glass constant temperature water bath

1. Brief introduction of digital display glass constant temperature water bath generator:

The 76-1A digital display glass constant temperature water bath adopts digital temperature control, the reading is intuitive and accurate, and the conjoined type is more convenient to use. It is a major university, environmental protection, scientific research, health and epidemic prevention, petroleum, chemical, food and other units The necessary instruments for laboratory analysis.

Second, the main technical indicators of digital glass constant temperature water bath:

Temperature range: room temperature ～ 100 ℃

Temperature control accuracy: ± 0.5 ℃

Power: 1KW

Studio volume: ∮300X300mm

Power supply: 220V50Hz

Third, the use of digital glass constant temperature water bath:

1. The water pot must be added before use, and can be added according to the required capacity, but not lower than the height of the heating tube.

2. Turn on the external power supply, turn on the power switch, and tune the required temperature: ① Turn the temperature “setting-temperature measurement” selection switch to the setting end, adjust the temperature adjustment knob, and digitally display the set temperature value; ② set the temperature "Setting-temperature measurement" selection switch is reached to the temperature measurement end, and the actual temperature of the working water tank is displayed digitally. (Yellow indicator lights up to indicate heater operation.)

3. Adjust the speed control knob to the required speed.

4. After use, adjust the speed and temperature knobs to the minimum value, and turn off the power switch to cut off the power.

4. Matters needing attention in digital glass constant temperature water bath:

1. The shell should be properly grounded during use to avoid accidents;

2. All solutions are strictly prohibited from entering the control room to avoid damage to the host;

3. It is strictly forbidden to heat without water in the water tank, so as not to burn the heating tube;

4. The stirring slurry must be submerged in water before it can work;

5. When the instrument breaks down, please check with a master who understands the electrical appliance or notify our factory for repair.

Top & Bottom box/2pcs paper box with lid

Top & Bottom box /2pcs paper box is one of the most popular design for gift packaging as they are multi-designed but cheap . They are generally used for fashion , cosmetic, gift and promotional fields.

Box`s type

Top & Bottom box/2pcs paper box can be divided into 3 types . The first type is the general 2pcs box as follows . In general , height of lid is the 1/2 or 2/3 of the base , same height to lid is also acceptable for us . The second type the 2pcs box in V-groove deisgn (with sharp edge) , the third type is the 2pcs box with shoulder , it can be divided into 2 types as well , one is with visable gap , another is without any visibale gap .

Regarding Machine and maximum production capacity

We now have 1 automatic lid and base making machine and 1 half-automatic lid and base making machine to make these Top & Bottom box/2pcs paper box . For the time being , our maximum production capacity for the lid and base boxes are 500K per month .  

Top & Bottom Box/2pcs Paper Box With Lid

Handmade Paper Box,Top/Lid Paper Box,Bottom/Base Paper Box,Lid And Base Box

Huizhou Cailang Printing Products Co.,Ltd. , https://www.paperboxs.nl