The cleaning liquid is divided into dye (water) and pigment (oil, solvent, and solvent) nozzles for cleaning. The United States imported raw material configuration, good performance and stability. The basic method of use: Pour the cleaning liquid into the container (or the printer nozzle cleaner), the height of the nozzle is just soaked, do not let the cleaning liquid contact the circuit board of the nozzle. Let the nozzle continue to soak in the cleaning liquid for more than a few hours (better overnight) so that the cleaning fluid can function. When soaking, it can be used in conjunction with the printer nozzle cleaner to enhance the clear-through effect. If it is necessary to carry out the internal sponge cleaning of the ink cartridge, heat the cleaning liquid to 60°C and pour it into the sponge body so that the cleaning liquid will melt away the agglomerated ink and use it with the printer's nozzle cleaner to melt the cleaned fluid. The ink is withdrawn or dried with a centrifuge. The nozzle cleaning fluid is used for the cleaning of printer nozzles, ink cartridge nozzles, and inkjet printer nozzles. It is the gospel for printers, inkjet printer repair and remanufactured ink cartridge manufacturers. Note: The special cleaning liquid for the print head only affects the printing defects caused by the ink. For example, due to the impurities in the inferior ink or the corrosion, precipitation, etc. caused by the inferior ink, and other poor printing, the product is not in the product. Within the scope of action. Product packaging: 500 ml bottle (standard), 100 ml small bottle (sample), 30 ml pin corrugated bottle (portable). *Be sure to perform the ink test before cleaning, if you do not know ink performance or use self-aligned ink, pour some of the ink you used in a small container, add the cleaning solution, observe if it dissolves completely, if not, please do not perform the nozzle Clean and replace the correct type of cleaning fluid.
note:
1. When the user disassembles the printer nozzle, it is necessary to turn off the printer power (unplug the socket), it is best to put anti-static ring on the hand (generally available at the electrician's tool shop), if not, touch the water pipe and other conductors during disassembly. , Release the body's static electricity, and sometimes the body's static electricity is too high, and its easy to break through the motherboard components, resulting in printing, everything is normal, but no ink phenomenon.
2. Before the power is installed on the nozzles, make sure that the nozzles are dry. Otherwise, the phenomenon of burning heads can easily occur. Tips: General desktop printer ink mostly water-based ink, the use of water-based cleaning solution; HP, Lexmark part of the printer using waterproof ink, the use of oily cleaning fluid; most domestic inkjet printers use weak solvent ink, the use of weak solvent cleaning fluid Strong solvent ink using weak solvent cleaning solution can be solved for a slightly longer treatment time. The weak solvent cleaning solution has little effect on other components of the nozzle. Strong solvent cleaning solution will wash the weak solvent ink and will affect other components of the nozzle. Therefore, it is impossible to determine the best. The use of weak solvent cleaning solution, solvent-based ink is generally more odor than water-based ink, strong solvent than the weak solvent-type flavor; most of the market thermal transfer ink must use weak solvent-based cleaning solution; solvent-based ink if the use of aqueous cleaning fluid, The nozzles will be even more severe; Epson inkjet printers must use aqueous cleaning fluids, which must be tested after the ink is used.