â— CPT11 will change the printing industry's new launch of the CTP11 for the first time to make accurate, stable, and trustworthy measurements of printing plates into reality. It is lightweight, easy to use, and takes less than half a second to measure. CTP11 can be used to measure a variety of lithographic plates, providing accurate and effective feedback and control for traditional printing and computer-to-plate.
â— Assurance of plate measurement Until now, most printers still rely on experience or sharp eyes to detect the dots. This detection method is not a very effective solution. Some users use densitometers to measure the dots of the plate, but this may increase the probability of inaccuracy. Because the densitometer's light source will be scattered by the plate's metal particles. Another method is based on computers, but this solution is too complicated and difficult to use and is not suitable for daily plate measurement.
◠Accurate CTP11 has a high degree of accuracy and reliability. Recalibration of the entire media is not necessary because the base density and color of the media do not affect the measurement accuracy of the instrument after initial calibration. It has a three millimeter target window with a precision of plus or minus one percent over the entire measurement range. It works mainly by recording the two calibration values ​​of the plate, the values ​​of the substrate and the film. The internal processor will set a threshold based on these values ​​to calculate the 60,000 pixels in the frame. If 30,000 of them are white, 30,000 pixels are black, then the result is 50%, which is very simple.
CTP11 implements a stable and stable international standard, which ensures the accuracy and repeatability of the instrument.
â— Easy to use and Density Measurement The difference is that the CTP11 media measurement instrument does not need to set 50%. Its own micro CCD array image analysis system and internal logic computing module can complete the complex process of plate material measurement. You only need to take ten seconds to make a simple setting and you can make accurate measurements on the plate without any additional calibration process. The CTP11 is small and weighs a few ounces.
â— The innovative CTP11 is truly unique. It includes two 8-bit microprocessors, a high-density logic module, and a miniature CCD lens. The white LED light ensures accurate measurement of any current brand of PS (regardless of the color of the film used). The CTP11 uses a series of high-tech and effectively integrates them all together.
â— Trustworthy Although the CTP11 is very light, this does not affect its stability. The replaceable 9-volt battery can read 5000 times without expensive external power supply or lithium battery system.
â— The proven CTP11 has passed the long-term test of OEMs and users of international printing organizations. The U.S. Graphic Arts Alliance has evaluated this conclusion: It is a very effective tool for accurate measurement of a series of offset printing plates and is easy to use.
â— Correct RIP
In addition to being able to accurately measure the dot of the plate, CTP11 can also help users to effectively correct the platesetter. The RIP can be linearly corrected by measuring the screen dot.
â— Easy operation When using the CTP11 to measure the plate for the first time, it only takes eight seconds to read the blank space. When the screen displays the CAL, measure the field again until the screen shows 100%. Each correction can last for 24 hours. If you want to convert a negative or positive version, simply re-select the correction.
â— Display three-digit LCD display, can display the percentage of outlets, calibration and loss warning.
â— Simple and easy-to-use features, built-in CCD camera, dual processor and image analysis system, portable, high repeatability, accurate performance, measurable negative and positive version, built-in serial port to connect to PC, LCD display and various warnings , White light source can measure any color plate â— Technical parameters Technology: Two 8-bit processor, high-density logic module, CCD array and serial output power supply: replaceable 9-volt battery life: more than 5000 times, automatic Sleep power-saving mode Accuracy: Full +/- 1% Measuring aperture: 3mm round hole