Why do you need to release the wood after it has dried?

Many wood processing manufacturers often ask us why it is necessary to dry the wood for a period of time before using the jigsaw glue for wood jigsaw. If the time is insufficient, it is very easy for the products after the woodworking rubber panels to be cracked.


As a professional woodworking rubber manufacturer, Jincheng adhesive, which has 16 years of experience in woodworking rubber production and development, will be popularized for everyone. The reason why the wood needs to be released after drying is as follows:  

The general treatment method of the wood after drying out of the kiln is to be allowed to stand in the dry material health warehouse for a certain period of time, mainly because the moisture in the wood changes due to volatilization during the drying process, which easily causes the size and volume of the wood. The changes that occur cause internal stresses inside the wood.
 
Therefore, before using wood glue panels, the wood must be aged for a certain period of time. According to our past experience, the wood release time is recommended to be at least 1 month (depending on the ambient humidity, ambient temperature, sheet material, etc.) Decision) can play a role in reducing the stress in the wood.
 
Of course, wood using wood glue panels must strictly control its final moisture content. It is generally recommended that the moisture content be between 8-15%. At the same time, it must be ensured that the wood moisture content deviation of the whole kiln is controlled to the minimum range. The plate will not crack.
 

Feeder

Automatic Pet Feeder For Cat Dog,Pet Water Dispenser Feeder,Pet Smart Feeder For Dog,New Design Smart Fashion Pets Feeder

NINGBO BRIGHT MAX CO., LTD. , https://www.smartrider-equinebrush.com