Introduction to furniture drop tester
Dongguan Haida Instrument 400-071-1808/0769-89280808
Furniture Drop Tester Product Description:
The furniture drop tester is suitable for the product during the process of moving or transportation, it may fall and cause the internal product to be damaged, and the damage is prevented in advance. The machine can be used to anticipate the test, so that the best solution can be obtained. Loss can be minimized during the delivery process . Drop test machine test principle: The test sample is lifted to a predetermined height, and then it falls freely in a predetermined state and collides with the impact table.
Design Standards: ISO 2248 , JIS Z0202-87 , GB/T4857.5-92
Furniture drop tester main technical parameters:
Display method: ruler indication
Drop height: 400 to 1100mm
Single wing area: (W×L)300×1000mm
Falling panel area: (W×L)1500×1100mm
Maximum size of test piece: (L×W×H)1000×1500×800mm
Maximum weight of test piece: 120kg
Dimensions: (L×W×H)1500×1300×1600mm
Control box size: (L×W×H)350×350×1100mm
Machine weight: 800kg
Power supply: 1 ∮ , AC220V, 50Hz
Transmission mode: electric drive
Horsepower: 1/2P
Furniture drop tester operation precautions
◠This equipment is a test and test equipment. Please do not use this equipment for purposes other than test and materials. 　　
◠Please complete the installation environment. Please put it at room temperature. Places with low humidity. ( No condensation below 80% ) Locations with less dust and dust. 　　
◠Please install the test material as required, otherwise unexpected failure may occur. 　　
◠When performing wiring and maintenance work, be sure to turn off the power. 　　
To prevent accidents and electric shocks caused by loss of control of the machine during operation, please turn off the power before proceeding.