What components do the cylindrical beds consist of?
According to the shape of the leg and the overall appearance, the bed can be divided into three types: cylindrical bed, sleigh bed and square bed. The three types of bed heads are generally composed of these components: left and right bed legs, upper brain (hats), bed head sheets, lower files, reinforcing strips, etc., and the combination is made of cloth, nails, and oblique locks. Quick teeth are combined.
The following are the product structure and standards of the cylindrical bed:
1. The bed column is generally composed of several ruts, and its connection method is mainly composed of true cymbal, false cymbal, iron die and double-toothed teeth. True and false sputum combination must be slashed with wood chips and cloth glued tightly. The iron teeth are locked with 3pcs fast teeth, and the fast tooth length is not allowed to be less than 1*1/2. To ensure the stability of the bed column (unless there are special requirements).
2. The headboard cap must be symmetrical at both ends, and its line shape must meet the design requirements.
3, the outer arc of the headboard cap must be coordinated with the curvature of the bed piece. The assembly method is different according to the design: a, the cap is exposed and the piece is 3mm; b, the cap is covered by the bed; c, the cap is flush with the piece.
4, bed sheet forming is generally 18mm MDF board according to the actual requirements of the sheet, must be symmetrical when forming, the upper end must be sealed when exposed PU. (The lower end seal PU is based on actual requirements)
5. When there is a hoe on the top and bottom of the bed (the shape is U in the middle), the position of the hoe must match the position of the slot of the bed.
Related reading: What is a sleigh bed? What is the structure of the sleigh bed?
6. When the bed column is attacking the double-headed teeth, it must be clothed with gas glue. The position of the double-headed teeth must be at the center of the whole bed.
7. If the bed column is engraved or pulled in the assembly process, it must be in the center position (unless there are special requirements).
8. The position of the iron core hole or the screw hole position of the bedside bed must be the same (including the foot pad at the lower end).
9. The position of the inclined hole of the bed piece (the counterbore locked into the bed leg) is not allowed to be higher than the height of the bed.
10, the bed tail is generally 18mmMDF board double-padding, usually the upper end of the formation of the group of hats, straight side set of caps.
Nail U Tip Hair,U Tip Hair Extensions,Blonde Nail U Tip Hair,U-Tip Fusion Hair
Jinan Vogue Hair Products Co., LTD , https://www.voguehairfactory.com