The plate-making machine is widely used in low-voltage power distribution systems and is a protective electrical component. When designing the low-voltage power distribution system, pay attention to the selectivity of the plate-making machine, select and set the rated current of the over-current release of the plate-making machine to ensure the full play of the function of the overcurrent release; when the ambient temperature is greater or less than the calibration temperature For the value, the rated current value of the low-pressure platesetter should be adjusted according to the temperature and current-carrying capacity correction factor provided by the manufacturer. This article will introduce you to the carton platesetter.
Make sure the platesetter is in good working condition. To ensure that the normal operation of the converter plate-making machine is inseparable from routine maintenance and maintenance work, when the plate-making machine has problems, take appropriate measures to deal with it. At the same time, the maintenance work of the plate making machine can make the plate making machine in good performance and working state.
Prevent possible problems with the platesetter.
Improve the efficiency of the platesetter. Inspection and maintenance of the converter plate-making machine can prevent the occurrence of accidents, eliminate the hidden dangers in time, and avoid affecting the normal operation of the plate-making machine due to the occurrence of accidents, thus contributing to the improvement of the operating efficiency of the plate-making machine.
Problems in overhaul and maintenance of converter plate making machine
Thought is not enough. Iron and steel enterprises often focus on production and management, often overlooking the maintenance and maintenance of the plate making machine. The operation status of the converter plate-making machine is not known, which affects the inspection and operation of the converter plate-making machine.
Work is not carried out according to process requirements. In the inspection and maintenance of the converter plate-making machine, including inspection, testing, assembly and other work, do not strictly follow the corresponding process to work, the work of each link is discounted, often leaving hidden dangers to the operation of the plate-making machine.
When the plate-making machine performs minor measurement and inspection on the plate-making machine during inspection, it does not make detailed records on the inspection contents, items, data, measurement methods, conclusions, etc., affecting the subsequent inspections and the corresponding measures taken, for the whole The operation of the platesetter also has an adverse effect.
Studying the overcurrent protection of the plate-making machine is of great significance in the low-voltage power distribution system. Correct use of the plate-making machine can effectively improve the running performance of the low-voltage power distribution system, especially for enterprises that have a major impact on power outages, and should pay attention to the plate-making machine. Scientific selection, reasonable current parameters, to ensure the stable operation of low-voltage distribution systems.
Article source address: http://
Galvanized Wire Mesh
Galvanized Wire Mesh,Galvanized Field Fence,Steel Galvanized Wire Mesh,Galvanised Woven Wire Mesh
Anping Chuangqian Wire Mesh Co., Ltd , https://www.cqwiremesh.com