Working methods and matters needing attention:
1. Horizontal working mode:
A: Move the magnetic drill (magnetic seat drill) to the workpiece (note: the surface of the workpiece must be flat and free of iron debris and other debris).
B: Turn on the power, turn on the magnetic drill switch, so that the magnetic seat is firmly absorbed on the surface of the workpiece.
C: Install the required bit, loosen the top screw of the turntable, turn the frame to align the bit with the center of the processing hole, tighten the top screw, and rotate the support rod to the top working surface.
D: Turn on the control switch of the magnetic drill (magnetic seat drill) to perform drilling operations.
E: After processing is completed, turn off the magnetic drill (magnetic drill) control switch and the magnetic drill drill control switch, remove the magnetic drill and magnetic drill from the processed parts, and clean the bottom of the drill.
2. Side working mode: (Note: During safety, one person is required to be on guard)
A: Insert the power plug into the power socket.
B: Raise the magnetic drill (magnetic drill) to make the bottom of the magnet abut the work surface, turn on the magnetic seat control switch, and make the magnet firmly adhere to the work surface.
C. Fasten the seat belt (safety chain).
Install the required drill bit, loosen the top screw of the turntable, turn the frame to align the drill bit with the center of the processing hole, tighten the top screw, and rotate the support rod to the top working surface.
D: Turn on the control switch of the magnetic drill (magnetic seat drill) to perform drilling operations.
E: After processing, turn off the magnetic drill (magnetic drill) control switch, the two grasped the magnetic drill (magnetic drill), unfastened the seat belt (safety chain), closed the magnet to open, removed the magnetic drill Block drill).
3. Item-face working method: (Note: During safety, one person is required to supervise)
A: Insert the power plug into the power socket.
B: Raise the magnetic drill (magnetic drill) to make the bottom of the magnet abut the work surface, turn on the magnetic seat control switch, and make the magnet firmly adhere to the work surface.
C. Fasten the seat belt (safety chain).
D: Install the required drill bit, loosen the top screw of the turntable, turn the frame to align the drill bit with the center of the processing hole, tighten the top screw, and rotate the support rod to the top working surface.
E: Turn on the control switch of the magnetic drill (magnetic drill) to perform drilling operations. (Note: The iron filings are discharged downwards, and you must wear protective eyes and protective clothing).
Cable extension
Only standard extension cables are allowed, and grounded plugs and sockets can be used to supply power to the magnetic drill and magnetic drill. If the cable is damaged, it should be repaired or replaced.
Electrical Safety
Before connecting the power drill (magnetic drill) to the power supply, you must pay attention to whether the power supply voltage is the same as the voltage marked on the product nameplate. When the power supply voltage is higher than the applicable voltage of the magnetic drill (magnetic drill), the user will have an accident. At the same time, the tool will also be damaged. When the power supply voltage is lower than the required voltage of the tool, it will damage the motor. Therefore, if the power supply voltage cannot be determined, the motor cannot be started casually.
Premium quality materials Stainless Steel Utility Tong. Our Kitchen Food Tongs are made according to highest quality standards. Ergonomic shape makes the Stainless Steel Tongs easier to hold and prevent slippage.Food Serving Tongs completely fit for home,hotel and restaurant events such as for barbecues,stove pits or parties.It can also be used for daily use to pick up bread,salad,cake,steak,etc. Whatever you are a group or individual, we will do our best to provide you with accurate and comprehensive message about Stainless Steel Tongs!
Stainless Steel Tongs
Stainless Steel Utility Tong,Food Serving Tongs,Kitchen Food Tongs
Shantou HLCY Co., Ltd. , https://www.sthlcy.com