[ Chinese wardrobe net ] Many people choose a wardrobe when choosing a wardrobe, and the crown-specific wardrobe is very good from word of mouth, quality, environmental protection, then you know the process of the crown-specific wardrobe? Let's take a look at it next.
The following is the process of the crown-specific wardrobe:
1. The crown-specific wardrobe first needs to be clearly defined. First of all, consumers should be clear about the space where the wardrobe is placed, the storage functions required, and the decoration style of the home.
2. The customer chooses the right style. There are various types of crown-specific wardrobes, which are mainly divided into a cloakroom and a sliding door wardrobe. The cloakroom has a U-shaped cloakroom, an L-line cloakroom, and a type of cloakroom. The functional area is divided into a hanging area, a lattice rack, a trousers rack, and a pull basket. Stacking areas, drawers, etc. When selecting products, consumers should choose the appropriate style type according to the space situation, combined with the home decoration style and storage requirements. When choosing, the more functions, the better. The more the function, the higher the cost. In the calculation of the price, the hanging area is relatively low cost. When the clothes are not hanging, it can be used as a stacking area. Therefore, it is recommended to set more. Hanging area. In addition, non-standard plates are much higher than standard plates, and non-standard plates should be used as little as possible if conditions permit.
3. The size of the door. After confirming the product style, the staff of the specific wardrobe will be the size of the door, and the consumer should be able to work with the staff to ensure accurate measurement, avoid errors, and prevent quality problems and prices due to measurement. Calculated dispute. After the product style is generally determined, a partial deposit is required.
4. Out of design and quotation. After measuring the size, about 1-3 days, the crown-specific wardrobe designer will design the design and specific quotation according to the demand. If the consumer is dissatisfied with the design, he can adjust it on the spot and finally confirm it; after confirming the drawing, the general requirement is 50%. The deposit, but if the order is small, say only two or three thousand, it is possible to pay the full amount when the plan comes out. At present, the pricing method is mainly based on the expanded area, combined with the functional structure calculation, and the pricing is relatively complicated. It is best for consumers to carefully compare each item and retain the design drawings and detailed data.
5. Delivery to factory production. The production cycle is generally 15-30 days depending on the off-season season. Generally, the second half of the year is longer than the first half of the year. Consumers must anticipate the production time in advance when renovating.
6. On-site installation and after-sales service. After the production of the crown-specific wardrobe, the crown-specific wardrobe will notify the consumer to pay the balance and agree on the time of installation. When installing the staff, refer to the previous design drawings to check whether the hardware accessories are complete. Check whether the seams of the wardrobe are tight, whether the sliding door is smooth or not, whether the hinge of the swing door is firm, and whether the surface of the panel is intact. No scratches, if there is any problem, it should be reflected in time and resolved on the spot. The general wardrobe cabinet has a one-year warranty and a hardware 3-5 year warranty.
The above is the custom process of the crown-specific wardrobe that I introduced to you, I hope you will like it.
Pet Electronics Toys,Cat Electronics Toys,Electronics Toys
AUTRENDS INTERNATIONAL LIMITED , https://www.petspetscleaning.com