[ Chinese wardrobe network ] into the dazzling array of furniture market, solid wood furniture, panel furniture, pure solid wood, imitation wood, etc. These types will be confusing, solid wood furniture is natural and noble, panel furniture is novel and fashionable, it is hard to choose . How is the solid wood cloakroom and the panel cloakroom defined? What are their advantages and disadvantages? How to identify them and buy wooden furniture?
There are two kinds of solid wood furniture on the market.
One is a pure solid wood cloakroom material. That is to say, all the materials in the cloakroom are solid wood, including the table top, the door panel of the wardrobe , the side panels, etc., all made of pure solid wood, and no other type of artificial board is used. Pure solid wood furniture has high requirements on craftsmanship and materials. Solid wood selection, drying, finger jointing and seaming are also very strict. If any process is not tight, small cracking, loose joints, etc., the whole set of furniture is deformed, so that it can not be used.
The other is a solid wood cloakroom material. The so-called imitation solid wood furniture, from the appearance of the solid wood furniture, the natural texture, feel and color of the wood are exactly the same as the solid wood furniture, but in fact the furniture mixed with solid wood and wood-based panels.
Definition and characteristics difference
The solid wood cloakroom material refers to the furniture made of natural wood, and the surface of the cloakroom material can generally see the beautiful pattern of the wood. Furniture manufacturers generally pay attention to the varnish or matt lacquer for the solid cloakroom to express the natural color of the wood.
A panel cloakroom is a piece of furniture made from a medium-density fiberboard or particleboard surface. A large part of this type of furniture is wood grain simulation furniture. The veneer of some panel furniture sold on the market is more and more realistic, the gloss and feel are good, and the products with fine craftsmanship are also very expensive.
Purchase and identification technology
How to overcome the shortcomings in solid wood and panel cloakrooms? The easiest way is to buy products from famous brands. The products of excellent manufacturers often carry out strict drying treatment on solid wood furniture, so that the moisture content of wood is kept within a limited range. Such furniture is not easy to be deformed, and the after-sales service is guaranteed. In addition, famous brands use plate materials that meet environmental protection requirements for panel furniture, and most of the veneers are well treated. Good edge sealing makes the gas diffusion of plate furniture reach the lowest level, which does not cause any damage to the human body. Consumers should pay attention when purchasing. You can open the door or drawer to smell it. If there is a strong irritating smell, most of the formaldehyde is too high and should not be purchased.
How to identify whether a door panel or partition is made of solid wood? The key lies in wood grain and knots. For example, if a cabinet door looks like a pattern, then the corresponding pattern of the pattern changes, and the corresponding pattern is seen on the back of the cabinet door. If the correspondence is good, it is a pure solid wood cabinet door. Also look at the knot is also a good way to identify pure wood: optimistic about the location of the scar side, and then find the corresponding pattern on the other side.
Irregular Led Mirror,Illuminated Led Mirror,Irregular Backlit Mirror,Illuminated Makeup Mirror
Aosmay , https://www.aosmay.com