[ Chinese wardrobe net ] The volatilization of formaldehyde is closely related to temperature. In general, the higher the temperature, the more likely the formaldehyde in the furniture will evaporate. According to experts, the hot summer season is the most rampant season for formaldehyde evaporation: every room temperature rise of 1 °C, formaldehyde volatilized in wooden wardrobes and floors will increase the formaldehyde concentration in indoor air by 0.15-0.37 times. If the formaldehyde content of the wardrobe set by the consumer is not up to standard, it is easy to release formaldehyde in the summer.
Secret 1: Beware of the details of formaldehyde release
The emission of formaldehyde in the wardrobe is a very slow process. The length of the hazard is determined by the objective conditions and the coating is used.
Choose a strong brand wardrobe
The period of formaldehyde volatilization can reach 3-15 years. If the custom-made wardrobe formaldehyde is very serious, the effects of ventilation and adsorption are limited, and the problem cannot be solved fundamentally. Except that formaldehyde is only a temporary solution. The best way is to choose the large, well-known whole wardrobe manufacturers custom furniture, product quality is guaranteed, relatively healthy and environmentally friendly. Carefully purchase wardrobe surface decoration materials
Secret 2: Source of formaldehyde in the bedroom
The wardrobe is the largest piece of furniture in the bedroom and the main source of formaldehyde. This is because the formaldehyde in the living room is mainly derived from various furniture, plates and various adhesives using composite wood as a base material. Therefore, the amount of formaldehyde in the wardrobe sheet is directly related to air pollution in the bedroom.
Secret 3: Formaldehyde barrier barrier panel edge banding
Due to the relatively high cost of solid wood panels, in general, most consumers choose wood-based panels for the manufacture of substrates, then the environmental protection of the wardrobe is particularly important.
The function of the edge of the wardrobe is to seal the cutting section and prevent the sheet from releasing formaldehyde.
The sealing effect of the surface of the wardrobe on formaldehyde is very obvious. Reduce the number of furniture placed indoors
In the case that the function is basically satisfied, the number of pieces of furniture in the indoor space should be minimized, thereby reducing the emission of formaldehyde in the furniture.
Release the wardrobe formaldehyde in advance
Temperature, humidity, and ventilation all affect formaldehyde emissions. Therefore, under the premise of conditions, air conditioning and fresh air system devices can be used to adjust the indoor temperature and humidity and fresh air volume, so that formaldehyde emission is moderately controlled.
Ji'An ZhongXiang Natural Plants Co.,Ltd. , https://www.jxzxessentialoils.com