Customized wardrobe sheet selection has four to see quality and environmental protection is the focus

In recent years, custom wardrobes have been widely acclaimed, and they are very popular. In fact, the concept of custom closet was introduced to the country in recent years, but it quickly became popular. According to reports, the overall wardrobe is favored by the market, because it can be tailor-made, rational use of space, design more humane, and environmentally friendly, stylish, professional. However, the core material used as a custom closet is the most important part of the custom wardrobe and the most used part. The quality and workmanship of the panel used by the wardrobe manufacturer directly determines the quality of the overall wardrobe.

So how do you choose a healthy and durable custom closet sheet?

1, different grades, the plates are also different.

How to judge the panel of the custom closet, generally look at the cut surface of the sample. From the cut surface, the blockboard is a two-layer or four-layer veneer (also thickened using four or more veneers) close to the solid wood core. The quality of the blockboard has a flat cut surface with no gaps; the MDF is made of fine fibers, and the combination is relatively tight and the weight is relatively large; the particle board is a wooden granular structure, but the combination is not tight enough and the weight is light. The poor quality can even be seen with small pores; the multi-layer board is made of a plurality of veneers, usually three or five layers.

2. Look for environmentally friendly panels.

Professional custom wardrobe manufacturers use environmentally friendly panels that meet national testing standards, while some manufacturers use inferior panels that have no test reports and pose a potential threat to human health. Therefore, to buy a custom closet should first look at whether the business has a plate inspection report and related test certificate from the national authority inspection department.

3, the veneer looks at the quality.

Some wardrobes look good on the surface, however, with a light stroke, you can draw obvious scratches. These custom-made wardrobes are made of surface-coated vellum paper or ornate paper sheets that are often used in low-cost wardrobes on the market, and have poor wear resistance. Professional custom closet manufacturers generally use environmentally friendly melamine veneer with thick thickness and high temperature and high pressure treatment, high surface strength, abrasion resistance and scratch resistance.

4, sheet metal sealing to see work.

Professional custom-made wardrobe manufacturers use precision panel saws to cut sheets, and there is no chipping around the sheets. After the edges are sealed, the water in the air is effectively prevented from intruding into the interior of the board. Some manufacturers have no professional equipment, rough cutting, and obvious edge collapse around them. Some even cut corners and only cut one side of the front side of the board. The unsealed surface easily absorbs moisture from the air, causing the sheet to swell, causing the wardrobe to deform and affecting the service life.

The meaning of the bedroom is to bring us the pleasure and passion beyond the function, and it is the paradise for us to enjoy the high quality of life.